aluminium alloy tube
"
4도어 자동차를 위한 어떤 독성 알루미늄 합금 시트
No Toxicity Aluminium Alloy Sheet for Four Doors for Automobile Description Trumony Aluminum has been a leading supplier since we were founded in 2006. We focus on the research and development of aluminum heat exchange materials for almost 20 years. We have lots of exporting experiences, we ship worldwide over 50 countries. We have developed lots of new alloys for heat exchangers to meet the different technical requirements of customers. We have developed the our own series
증발기/응축기/연결 관을 위한 둥근 얇은 알루미늄 배관 3000 시리즈
3003 / 3103 Aluminum Enhanced Round Tube For Evaporator / Condenser / Connection Tube Product Description: The Aluminum Enhanced Round Tube is an internally enhanced aluminium tube for high-fin density condensers and evaporators. The inner grooves improve heat transfer, offering higher efficiency by more compact design. Additional Zinc coating layers are available to further increase corrosion resistance, which makes this product a high performing tube. different grooves
3003/3102 자동차 열교환기를 위한 내밀린 알루미늄 방열기 관
3003 / 3102 Extruded Aluminium Radiator Tube For Automobile Heat Exchangers Multiport Extruded Aluminum Tube(MPE) is widly used for automobile air conditioner condenser,it has larger internal section area, better effectiveness for heat transfer. At the same time, it has these very good performances,including Excellent conduction of heat,Excellent corrosion resistance,High cycle reuse value,High surface quality,Low weight and High compressive reinforcement. Beside increased
열교환기를 위한 1050/1100/3102/3003 마이크로 다 항구 편평한 알루미늄 방열기 관
1100/3102/3003 Micro-multiport Flat Extrusion Aluminum Tube Product Introduction: Micro Multiport Extruded Aluminium Tube,is a kind of thin porous flat tubular material,which is treated by surface spraying zinc,using refining aluminum bar by hot extrusion.It is mainly used for the production of heat exchangers. Due to its high corrosion-resistance and good heat conductivity, MPE tube is particularly well suited for the use in evaporators and condensers. Commonly used material
자동차 인터쿨러를 위한 3003 편평한 내밀린 알루미늄 방열기 관
3003 Flat Extruded Aluminum Radiator Tube For Automobile Intercooler 1. Product Description: Aluminum radiator tube is an important spare part not only for auto radiators,but also for auto condensers,intercoolers etc.Good quality aluminum extruded tubes can protect auto engine, as it ensure your radiator with high efficient cooling performance. 2. Commonly used material chemical composition: No. Alloy Si Fe Cu Mn Mg Cr Zn V Ti 1 1050 ≤0.25 ≤0.40 ≤0.05 ≤0.05 ≤0.05 --- ≤0.05 ≤0
콘덴서 이음새가 없는 알루미늄 압출 튜브 내부식
Condenser Seamless Aluminium MPE Extrusion Tube Micro-channel flat aluminum pipe with their large internal surface area, yield more efficient heat transfer and are therefore ideal for use in highly effective heat exchangers.Aluminum flat tube is an important spare part for auto radiators. Good quality aluminum flat oval tubes can protect auto engine, as it ensure your radiator with high efficient cooling performance.Aluminum galvanized Micro Multi Port Extrusion (MPE) is the
알루미늄 배관 7072 30 × 8.0mm 고주파를 용접하는 대형 트럭 방열기
High Frequency Welding Aluminium Flat Tube For Auto Radiators / Heavy Truck Radiators Our High frequency welding tubes are widely used on various auto radiators,heavy truck radiators and other vehicle heat exchangers.The product contains a lot of tube types, including the most in common 16 mm, 26 mm, 32 mm etc. Furthermore, we also produce aluminum intercooler tube by size of 50mm and 64mm. Material: Alloy 4343/3003/7072;4343/3005/7072;4343/3003;4343/3003/4343;4045/3003;4045
은광택 알루미늄 튜브(원형/사각형/다각형) 모양: 정사각형
We are a technology-oriented and reliable company, which professionally designing, manufacturing and selling special equipments for heater exchanger industry, it is one of “Hi technical solution” for customer. Our production apply in car industry, A/C industry, off-road industry, electric generator industry, shipbuilding industry. We offer Hi technical solution for power heater exchanger. We are servicing for international customer Visteon, Doowon; domestic customer Yinlun,
방열기/오일 쿨러/에어컨/열 교환기를 위한 3003/3102 알루미늄 편평한 관
3003 / 3102 Aluminum Flat Tube for Radiator / Oil Cooler / Air Condition / Heat Exchanger Micro-channel flat aluminum pipe with their large internal surface area, yield more efficient heat transfer and are therefore ideal for use in highly effective heat exchangers. The micro-channel tube also called The Multi-Port Extrusion (MPE)- is a highly refined quality product characterized by the following properties: Low energy costs High performance Low space and weight High
